[Answer ID: 14576]

How to: Start AOSS on wireless router ?

Created 07/30/2012 09:57  |   Updated 04/25/2014 08:31

 

AOSS is enabled by default on Buffalo Routers. By pushing AOSS button on the unit, the AOSS connection process on the router is activated.
You should try to activate AOSS on cient and next, push AOSS button on Router.

Generally, the button is pushed and held down until security LED start blinking.  For details on specifics per product refer bellow:

DWR-HP-G300NH、WHR-HP-G300N、WHR-HP-G300NA、WZR-HP-G300NH、WZR-HP-G301NH、
WZR-HP-G302H、WZR-HP-G302HA、WZR-HP-G450H、WZR-HP-G450HA、WZR-300HP、WZR-450HP

 

Hold AOSS button down (approximately 1 Sec) until security LED starts blinking. Once  the security setup is successfully completed , security LED will turn to steady ON.


Image
 

WZR-HP-AG300H、WZR-HP-AG300HA、WZR-600DHP

 

Depending on the interfaced 2.4 GHz (LED)  or 5 GHz (LED) , there are 2 LEDs that indicate security setup per interface.

Hold AOSS button down (approximately 1 Sec) until security LED starts blinking. Once  the security setup is successfully completed , security LED will turn to  steady ON.

Image



 

WZR-D1100H

 

Hold AOSS button down (approximately 1 Sec) until security LED starts blinking. Once  the security setup is successfully completed , security LED will turn to steady ON.

Image


 

WZR2-G300N


Hold AOSS/WPS button down (approximately 3 Sec) until security LED starts blinking. Once  the security setup is successfully completed , security LED will turn to steady ON.

Image

WHR-G300N、WHR-G301N、WHR-G301NA、WHR-300、WHR-300HP

Image

Hold AOSS/WPS button down (approximately 1 Sec) until security LED starts blinking. Once  the security setup is successfully completed , security LED will turn to steady ON.



 

WHR-HP-GN


Hold AOSS/WPS button down (approximately 1 Sec) until security LED starts blinking. Once  the security setup is successfully completed , security LED will turn to steady ON.



Image
 

WHR-G、WHR-HP-G

 

Hold AOSS/WPS button down (approximately 1 Sec) until security LED starts blinking. Once  the security setup is successfully completed , security LED will turn to steady ON.

 

WHR-G54S、WHR-HP-G54

Image

Hold AOSS/WPS button down (approximately 1 Sec) until security LED starts blinking. Once  the security setup is successfully completed , security LED will turn to steady ON.



 

DWR-PG

 

Hold AOSS/WPS button down (approximately 1 Sec) until security LED starts blinking. Once  the security setup is successfully completed , security LED will turn to steady ON.


Image

 


 



Details


Products

OS / Hardware

Was this answer helpful?
Please tell us how we can make this answer more useful.

Refine your search

Select Product / OS & Hardware

      Enter Keywords or a specified ID