[Answer ID: 14761]

How to: Verify or test port forwarding setup ?

Created 10/04/2012 11:13  |   Updated 10/12/2012 13:12

 

 

Port forwarding setup on AirStation  router can be verifird in one of the following ways :

 

1) start the server (server process/service) on the PC/LAN side.

you can use Netcat to simulate a server. Issue the following command on server PC :


 nc -l -p  LAN_side_PORT

For example, if you have web server running on port 81, you can simulate a server by issuing the following command:

nc -l -p 81

 

2)  Next, you have the following options to initiate a connection from external network to the WAN port.

A. use a web based port scanning tool provided by any 3rd party such as the following for example  :

http://www.t1shopper.com/tools/port-scan/

 

B. Alternatively, use Netcat software to connect or scan a range of ports on WAN side.

 Issue,  from a host outside your LAN network through WAN/Internet connection the following command:


echo hello | nc server_public_IP WAN_port

or

telnet server_public_IP WAN_port

 

A successful connection from a host outside the network  to the server/PC is a confirmation that port forwarding setup is correct. 

 

Trouble Shooting

Check firewall settings on both client and server PCs :

to check firewall on your PC is not blocking the port,  run Netcat as server and send an echo command from another command console on the same PC :

   A) server on console#1: nc -l -p 8181

   B) on same PC, client on console#2: echo hello | nc 127.0.0.1 8181

if you do not see the hello mesage on console 1, this means the port is blocked. change firewall settings to unblock the port.

 

 

 



Details


Products

OS / Hardware

Was this answer helpful?
Please tell us how we can make this answer more useful.

Refine your search

Select Product / OS & Hardware

      Enter Keywords or a specified ID