FAQs | Find Answers
Search Results
Results 21 - 30 of 69
Recommended Links
- What does the message on the LCD display indicate when the ERROR LED is turned on? _02 (TS3000 series)
[Answer ID: 15472]
Refer to the following boxes which is listed the meaning of LED blinking and the resolution.If the firmware version is 1.12 or earlier, please click here to see the error codes.LCD Message...
- What does the message on the LCD display indicate when the INFO LED is turned on? _02 (TS3000 series)
[Answer ID: 15473]
After you change settings or format a hard drive, the current status is displayed on the LCD.If the firmware version is 1.12 or earlier, please click here to see the current status....
- Which of LAN1 and LAN2 is used for the replication task?
[Answer ID: 15490]
- If the firmware version of the TeraStation is 2.50 or earlier, LAN port below is used for replication, depending on the way of connection. The main TeraStation and the backup TeraStation are connected with LAN1 only.: LAN1 is used for replication....
- Flickr cannot be configured from the LinkStation.
[Answer ID: 15548]
Flickr has modified their services and thus is no longer available from the LinkStation. - Settings were reset after updating the firmware. (TS-2RZ Series)
[Answer ID: 15633]
Some settings will be reset after updating the firmware ver.1.xx to ver.2.00 or later. In this case, please set them again. Case 1. DLNA settings of a folder will be disabled.Solution 1....
- I cannot connect to the PPTP server in Windows 10.
[Answer ID: 15756]
Refer to the following steps to change the VPN connection setteings, if a PPTP server is used. Right-click the Network icon in the taskbar notification area and choose [Open Network and Sharing Center]....
- When "Assign authorization to external SMB server" is selected, authentication from Mac OS X 10.8 or later is failed.
[Answer ID: 15758]
If the hostname is more than 10 characters, authentication from Mac OS X 10.8 or later is failed. Set the hostname 10 characters or less. - When changing the IP addess from NAS Navigator2 or SmartPhone Navigator, the DNS server address is initialized.
[Answer ID: 15781]
If a fixed IP address and the DNS server address are set, the DNS server address will be initialized when changing the IP addess from NAS Navigator2 or SmartPhone Navigator. Open the interface and set the DNS server address again....
- The initial settings from LinkNavigator have failed.
[Answer ID: 15809]
The initial settings from LinkNavigator may fail if there is no DHCP server in the network. Set again, and if the message "The settings have already completed." is displayed, the settings have been successfully completed....
- I cannot install NAS Navigator2.
[Answer ID: 15810]
You cannot use or install NAS Navigator2 when using a domain user. Install it as a local user.